***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Wed Nov 27, 2024 8:03 am


Board index » CNC and Lutherie

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 
  Print view Previous topic | Next topic 
Author Message
Bill Bergman
 Post subject:
PostPosted: Sun Aug 12, 2007 3:25 am 
Offline
Cocobolo
Cocobolo

Joined: Thu Nov 16, 2006 9:19 am
Posts: 163
Is there a CNC source to cut guitar molds?
Top
 Profile  
 
Parser
 Post subject:
PostPosted: Mon Aug 13, 2007 1:30 am 
Offline
Koa
Koa
User avatar

Joined: Tue Nov 28, 2006 1:44 pm
Posts: 1105
Location: Crownsville, MD
First name: Trevor
Last Name: Lewis
City: Crownsville
State: MD
Zip/Postal Code: 21032
Country: USA
Focus: Build
Status: Semi-pro
What do you mean by "Molds"? Do you want to actually mold something or are you looking for code to actually cut out a body or other part?

_________________
http://www.PeakeGuitars.com
Top
 Profile  
 
Bill Bergman
 Post subject:
PostPosted: Mon Aug 13, 2007 2:11 am 
Offline
Cocobolo
Cocobolo

Joined: Thu Nov 16, 2006 9:19 am
Posts: 163
Yes, Hesh is correct. What I want is to be sure that the sides of the mold are exactly true, so that I can glue linings, braces, etc. against the mold. John Hall tells me that his molds are +/- 1/16", which I don't think would work for what I have in mind. From time to time I have seen even aluminum molds, which I am sure somebody had custom machined.
Top
 Profile  
 
Pwoolson
 Post subject:
PostPosted: Mon Aug 13, 2007 2:24 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sat Jan 08, 2005 1:26 am
Posts: 2556
Location: United States
Billy, I'm interested to hear what your project is.
Most wooden sides don't fit spot on to the mold all the way around each time. Even with various spreaders, it can be tricky to get everything sucked up to the mold perfectly.
But to your question, Check with CNC guys, if you want AL molds, check a machine shop that has a CNC.


Top
 Profile  
 
Rick Turner
 Post subject:
PostPosted: Mon Aug 13, 2007 2:55 am 
Offline
Koa
Koa

Joined: Wed Aug 24, 2005 11:13 am
Posts: 1398
Location: United States
Aluminum molds are usually sand cast and then finish machined; at least that's what Martin and Taylor do.
Top
 Profile  
 
Bill Bergman
 Post subject:
PostPosted: Mon Aug 13, 2007 3:00 am 
Offline
Cocobolo
Cocobolo

Joined: Thu Nov 16, 2006 9:19 am
Posts: 163
Paul, I used to have a 1/2 side outside mold that I made by a laborious method to match the inside bending mold. I could assemble 1/2 sides and then join them, and all was fine. The mold got ruined in a flood. It's really laborious to make, and not necessarily perfect each try. So, I was looking for a better way. I don't see the CNC sponsor listed anymore.
Top
 Profile  
 
Bob Garrish
 Post subject:
PostPosted: Mon Aug 13, 2007 4:25 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Tue May 02, 2006 9:02 am
Posts: 2351
Location: Canada
First name: Bob
Last Name: Garrish
City: Toronto
State: Ontario
Country: Canada
Status: Professional
You could always use bondo or something to match the interior mold. I do CNC work in metal and wood if you can't find someone local.

_________________
Bob Garrish
Former Canonized Purveyor of Fine CNC Luthier Services
Top
 Profile  
 
Bill Bergman
 Post subject:
PostPosted: Mon Aug 13, 2007 5:38 am 
Offline
Cocobolo
Cocobolo

Joined: Thu Nov 16, 2006 9:19 am
Posts: 163
Bab,
Thanks. I actually did use Bondo a few times, including for the mold that was ruined in the flood. I may contact you later.
Top
 Profile  
 
Parser
 Post subject:
PostPosted: Tue Aug 14, 2007 3:04 am 
Offline
Koa
Koa
User avatar

Joined: Tue Nov 28, 2006 1:44 pm
Posts: 1105
Location: Crownsville, MD
First name: Trevor
Last Name: Lewis
City: Crownsville
State: MD
Zip/Postal Code: 21032
Country: USA
Focus: Build
Status: Semi-pro
I'd also be happy to cut one for you. I only do CNC work in wood/MDF but my equipment holds about .002". I made a nice MDF mold that I currently use.

I'd need either a digital picture and some overall dimensions or a physical tracing to start from. Please PM me if you'd like a quote (if my time was limitless, my generosity would be as well!).



_________________
http://www.PeakeGuitars.com
Top
 Profile  
 
John Mayes
 Post subject:
PostPosted: Tue Aug 21, 2007 1:31 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat Jan 08, 2005 3:37 am
Posts: 2670
Location: United States
First name: John
Last Name: Mayes
City: Norman
State: OK
Focus: Build
Status: Professional
we here at McPherson use solid aluminum molds. But I think they cost like
$500 each for the AL billets...maybe more.

_________________
John Mayes
http://www.mayesluthier.com
Top
 Profile  
 
Bill Bergman
 Post subject:
PostPosted: Thu Aug 23, 2007 7:47 am 
Offline
Cocobolo
Cocobolo

Joined: Thu Nov 16, 2006 9:19 am
Posts: 163
Thanks everyone.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 

Board index » CNC and Lutherie

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 5 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com